OPENBOX: Sidbang (i486/i686/amd64) Release News
Forum rules
The releases are not supported anymore. You can install and upgrade, but if you break it you are on your own.
The releases are not supported anymore. You can install and upgrade, but if you break it you are on your own.
Re: OPENBOX: Sidbang (i686) Release News
^^ wooohooo, thanks for a reminder of good times ;)
All statements are true in some sense, false in some sense, meaningless in some sense, true and false in some sense, true and meaningless in some sense, false and meaningless in some sense, and true and false and meaningless in some sense.
Re: OPENBOX: Sidbang (i686) Release News
is this a new pm he sent you? Really? He can't be serious.machinebacon wrote::Dceremonial wrote: 'I am not going to waste any time by explaining why it is moronic as I believe it is obvious to all. All I ask is that you please consider your actions and the affects they might have. To use a more loaded term, you are acting like a JERK, and it upsets me to see you behaving like this.'
Edit: enlightened by vic below. Thanks vic. I guess I had missed this mess back then.
Work hard; Complain less
Re: OPENBOX: Sidbang (i686/amd64) Release News
^dkeg, the answer is here;
http://crunchbang.org/forums/viewtopic.php?pid=261730
@machinebacon, thanks for the song:)
http://crunchbang.org/forums/viewtopic.php?pid=261730
@machinebacon, thanks for the song:)
Re: OPENBOX: Sidbang (i686/amd64) Release News
oh ok, I thought it had to do with sidbang. Good to know it was over a much more serious matter.
Work hard; Complain less
Re: OPENBOX: Sidbang (i686/amd64) Release News
Don't say 'butthurt' around snowpine! (it's a touchy subject)
Re: OPENBOX: Sidbang (i686) Release News
I actually kind of like it even a little better than slim. (I didn't think that was possible.) Nice work!machinebacon wrote:why slim?snowpensi wrote:why no slim???
we use bbqlogin.
-
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
- Contact:
Re: OPENBOX: Sidbang (i686/amd64) Release News
thanks Sir. It does basically the same thing: bring the user where he wants to go. And it also gives the choice of running an framebuffer or tmux session, which will hopefully satisfy the geeks at munch ;)
..gnutella..
-
- Saltimbocca-Roller
- Posts: 19
- Joined: Mon Oct 07, 2013 5:56 am
- Location: Columbia, SC
Re: OPENBOX: Sidbang (i686/amd64) Release News
This looks really sweet for my laptop now that I built a new rig. Crunchbang brought me back to Debian and in a way to the bbq.
But seriously, related to the cruchbang forum link, who the fuck drinks decaf? Many of the processes involve letting the beans sit in the same solvents I use in my lab. Please, everyone, let's stick to getting our cancer from tobacco as God intended and just drink our coffee with our drugs remaining in it. Same goes for my liquor, I like my congeners, stop trying to distill them out! Now where's my bourbon.....
But seriously, related to the cruchbang forum link, who the fuck drinks decaf? Many of the processes involve letting the beans sit in the same solvents I use in my lab. Please, everyone, let's stick to getting our cancer from tobacco as God intended and just drink our coffee with our drugs remaining in it. Same goes for my liquor, I like my congeners, stop trying to distill them out! Now where's my bourbon.....
-
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
- Contact:
Re: OPENBOX: Sidbang (i686/amd64) Release News
^ Excellent post. God gave Rock & Roll to everyone :)
..gnutella..
-
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
- Contact:
Re: OPENBOX: Sidbang (i486/i686/amd64) Release News
Added a RYO to the available versions. This one is made for distrolette-makers.
It comes with the Top Level Applications from Crunchbang 9.04 (pcmanfm for thunar, leafpad for geany, no XFCE4 dependencies, no GTK3 packages) and a 486 kernel to boot on older and low-resource PCs.
This means, there are five Sidbang spins available. Happy Roasting!
It comes with the Top Level Applications from Crunchbang 9.04 (pcmanfm for thunar, leafpad for geany, no XFCE4 dependencies, no GTK3 packages) and a 486 kernel to boot on older and low-resource PCs.
This means, there are five Sidbang spins available. Happy Roasting!
..gnutella..
Re: OPENBOX: Sidbang (i486/i686/amd64) Release News
I'm having a problem after installing the AMD64 version. When it ask for login I enter the username and passwd, but login failed. Installed again thinking that I forgot the passwd, but had the same problem. Help!! Excuse my noobiness!!!
I'm not late... you're too early! ME
Re: OPENBOX: Sidbang (i486/i686/amd64) Release News
Great work machinebacon! This makes a fanboi like me :)) One small question though, this slight refresh of the non pae version, what does that consist of? Something to be bothered about?
-
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
- Contact:
Re: OPENBOX: Sidbang (i486/i686/amd64) Release News
Nothing serious, just fixed two menu entries in the CLI menu. BTW, if you are bothered by the error messages at boot (upstream bug in kernel) you can remove the "hal" package (which is only added because some websites with stream media require hal, even though it is old and out of date)
..gnutella..
Re: OPENBOX: Sidbang (i486/i686/amd64) Release News
Thanks, first view of that error message made me a little bit shaky, but since everything worked like it should, I just thought no worry :D
@tuxic, same thing happened to me with the 686 version, to test it I used the bbqinstaller next time and installed with no changes to user, password, or hostname.
It worked without problem, just change that stuff later. By the way, the installer sort of froze on the last step, "installing bootloader", I just waited a couple of minutes and rebooted. Everything ok so far. :)
@tuxic, same thing happened to me with the 686 version, to test it I used the bbqinstaller next time and installed with no changes to user, password, or hostname.
It worked without problem, just change that stuff later. By the way, the installer sort of froze on the last step, "installing bootloader", I just waited a couple of minutes and rebooted. Everything ok so far. :)
-
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
- Contact:
Re: OPENBOX: Sidbang (i486/i686/amd64) Release News
tuxic, did you use the live-installer (with the graphical user interface) or the bbinstaller? Anyway, you can try to log in as 'bbq'/'bbq' or 'root'/'bbq'
..gnutella..
-
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
- Contact:
Re: OPENBOX: Sidbang (i486/i686/amd64) Release News
OK, sorry for the confusion
Please login as user "root" with the password you provided. Then create a user as wished with "adduser <username>" . I will add this to the release notes.
Sorry again ;)
Please login as user "root" with the password you provided. Then create a user as wished with "adduser <username>" . I will add this to the release notes.
Sorry again ;)
..gnutella..
Re: OPENBOX: Sidbang (i486/i686/amd64) Release News
@vic: thank you. This trick did the job
@machinebacon: really appreciated. Maybe some other "noobs" like me are having the same problem.
@machinebacon: really appreciated. Maybe some other "noobs" like me are having the same problem.
I'm not late... you're too early! ME
Re: OPENBOX: Sidbang (i486/i686/amd64) Release News
Installed 64 bit on my desktop, really shiny and nice. Sharing disk 50/50 with "Darkside". No problem so far.
Re: OPENBOX: Sidbang (i486/i686/amd64) Release News
@tuxic: now head over to the 'Introductions and General Discussion' subforum and let us know who you are!
All statements are true in some sense, false in some sense, meaningless in some sense, true and false in some sense, true and meaningless in some sense, false and meaningless in some sense, and true and false and meaningless in some sense.
Re: OPENBOX: Sidbang (i486/i686/amd64) Release News
I noticed the same deal as tuxix, had to log into recovery mode after install and make a new user (was not created during the install) but no biggie.
Any tips to get Suspend working right??
The option is grayed out...
A couple other minor things I noticed, super-x is broken (failed to execute "cb-exit") and there are no folder icons in the file manager.
Any tips to get Suspend working right??
The option is grayed out...
A couple other minor things I noticed, super-x is broken (failed to execute "cb-exit") and there are no folder icons in the file manager.