LinuxBBQ

I tried the cream release with the 915 option. I have a toughbook cf-y5, with i945 and 1400x1050. Then I see

xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 61.0*
800x600 61.0
640x480 60.0

This concerns me because it does not display my 1400x1050 that I get on other systems. Then I tried creating and adding a mode.
xrandr: Failed to get size of gamma for output default
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
Serial number of failed request: 19
Current serial number in output stream: 19



Anyhow, this might help someone else, even if I can't get it right.
When I set the mode in arandr I get:

Setting this resolution is not possible here: A part of an output is outside the virtual screen[/color]

Sorry I can't help you, I am not that acquainted to xrandr, but a little tip regarding the BBQ. Please introduce yourself here:
http://linuxbbq.org/bbs/viewforum.php?f=7


cheerio
simon

Ps: Rho, I beat you to it this time mate :D

Hmm my bad. I tried booting another option, and it appeared to pick up my modes.

Screen 0: minimum 320 x 200, current 1400 x 1050, maximum 8192 x 8192
LVDS1 connected 1400x1050+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1400x1050 60.0*+ 60.0
1280x1024 60.0
1280x960 60.0
1360x768 59.8 60.0
1152x864 60.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)

Thanks for reporting back, I have the CF-T5 and it runs quite nicely in correct resolution. In fact it is one of my test machines before I upload ISOs. If it doesn't pass there, it doesn't pass anywhere :)