[solved] kernel 3.8.2 and e1000e network

Forum rules
We don't support installations in VirtualBox, VMWare, qemu or others. We ignore posts about WINE, PlayOnLinux, Steam and Skype. We don't support btrfs, lvm, UEFI, side-by-side installations with GPT or dualboot with anything newer than Windows XP.
Google your problem first. Check the Wiki. Read the existing threads. It's okay to "hijack" an existing thread, yes! If your problem is not yet covered, open a new thread. To get the quickest possible help, mention the exact release codename in your post (uname -a is a good idea, too). Due to the lack of crystal balls, attach the output of lspci -nnk if you encounter hardware problems.
Post Reply
o.g.
runs Testing
Posts: 42
Joined: Fri Dec 21, 2012 2:40 pm

[solved] kernel 3.8.2 and e1000e network

Unread post by o.g. » Tue Mar 05, 2013 6:44 pm

Hello the Grills !

Today I noticed some problems with kernel 3.8.2/3.8.1 (from towo) and
e1000e network driver.
It is well known (see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=677638)
hat laptop-mode disables wired network when running on battery, so that
I modified (two monts ago) the right conf file to have battery and wired network.

Today the bad new is
1) with battery, the boot is very long and I do not have wired network.
ethtool eth0 gives "nothing known" : 4 lines only
2) with ac adapter, the boot is very long ( systemd-analyze blame =>
62108ms networking.service) but I have wired network.


I noticed (elitist) also that by default new user has bash shell but without any configuration.
So perhaps that adding minimal bash settings or choosing zsh by default should
be modified.

Updated : I tried with a pure-siduction-usb distrib and everything was fine. So I tried
again elitist and everything was fine. So :arrow:


O.G.
Top
Post Reply

Return to “SUPPORT (/usr/share/doc)”