speckdrum wifi bummer {Solved}
Forum rules
We don't support installations in VirtualBox, VMWare, qemu or others. We ignore posts about WINE, PlayOnLinux, Steam and Skype. We don't support btrfs, lvm, UEFI, side-by-side installations with GPT or dualboot with anything newer than Windows XP.
Google your problem first. Check the Wiki. Read the existing threads. It's okay to "hijack" an existing thread, yes! If your problem is not yet covered, open a new thread. To get the quickest possible help, mention the exact release codename in your post (uname -a is a good idea, too). Due to the lack of crystal balls, attach the output of lspci -nnk if you encounter hardware problems.
We don't support installations in VirtualBox, VMWare, qemu or others. We ignore posts about WINE, PlayOnLinux, Steam and Skype. We don't support btrfs, lvm, UEFI, side-by-side installations with GPT or dualboot with anything newer than Windows XP.
Google your problem first. Check the Wiki. Read the existing threads. It's okay to "hijack" an existing thread, yes! If your problem is not yet covered, open a new thread. To get the quickest possible help, mention the exact release codename in your post (uname -a is a good idea, too). Due to the lack of crystal balls, attach the output of lspci -nnk if you encounter hardware problems.
- wuxmedia
- Grasshopper
- Posts: 6454
- Joined: Wed Oct 17, 2012 11:32 am
- Location: Back in Blighty
- Contact:
speckdrum wifi bummer {Solved}
well looking forward to something like this but, wifi not auto... ok,
tried ceni...seemed to work. no network,
tried wicp-client seemed to agree on it being connected, no network
tried i915, bad choice.
no network - as in roaster wouldn't let me go anywhere, no ping, couldn't connect to the router.
not really sure how deep to go with ceni, last time i clicked on accept eveything and worked ok
played around a bit. like the colour, 'cept it seems the colour describing memory/swap in htop is the same as the background?
tried ceni...seemed to work. no network,
tried wicp-client seemed to agree on it being connected, no network
tried i915, bad choice.
no network - as in roaster wouldn't let me go anywhere, no ping, couldn't connect to the router.
not really sure how deep to go with ceni, last time i clicked on accept eveything and worked ok
played around a bit. like the colour, 'cept it seems the colour describing memory/swap in htop is the same as the background?
Last edited by wuxmedia on Thu Oct 25, 2012 9:22 am, edited 1 time in total.
Re: speckdrum wifi bummer
wux, i had the same thing i think on first run. please try this:
if it says 'softblocked: yes', do
now do the ceni routine again and see if it does work this time. it did for me.
Code: Select all
sudo rfkill list
Code: Select all
sudo rfkill unblock all
All statements are true in some sense, false in some sense, meaningless in some sense, true and false in some sense, true and meaningless in some sense, false and meaningless in some sense, and true and false and meaningless in some sense.
-
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
- Contact:
Re: speckdrum wifi bummer
1) Please post your output of
2) DHCP enabled on the router?
3) Try rhowaldt's suggestion to unlink the killswitch.
4) Change the colour scheme in .Xresources - that's what the BBQ releases are for.
Code: Select all
lspci -nnk
3) Try rhowaldt's suggestion to unlink the killswitch.
4) Change the colour scheme in .Xresources - that's what the BBQ releases are for.
..gnutella..
- wuxmedia
- Grasshopper
- Posts: 6454
- Joined: Wed Oct 17, 2012 11:32 am
- Location: Back in Blighty
- Contact:
Re: speckdrum wifi bummer
1> heres lspci;
2> router hasn't changed afaik.
update; router accepts and assigns an IP to host grill. via DHCP
I can see this via my router webadmin and wicip-client gives me a green light i can read signal strength and so on... it's connected, but no network...
i can ping myself...
3> trying it in 5 mins.
all were not blocked afaik.
4> looking forward to it 8)
i got a glib error on scrot...so no screenies. 8(
Code: Select all
wux@aspire:~$ lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02)
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02)
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:1001]
Kernel driver in use: iwl3945
06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: b44
06:04.0 CardBus bridge [0607]: ENE Technology Inc CB-712/4 Cardbus Controller [1524:1412] (rev 10)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: yenta_cardbus
06:04.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0530] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
06:04.2 SD Host controller [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller [1524:0550] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: sdhci-pci
06:04.3 FLASH memory [0501]: ENE Technology Inc FLASH memory: ENE Technology Inc: [1524:0520] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
06:04.4 FLASH memory [0501]: ENE Technology Inc SD/MMC Card Reader Controller [1524:0551] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Kernel driver in use: sdhci-pci
update; router accepts and assigns an IP to host grill. via DHCP
I can see this via my router webadmin and wicip-client gives me a green light i can read signal strength and so on... it's connected, but no network...
i can ping myself...
3> trying it in 5 mins.
all were not blocked afaik.
4> looking forward to it 8)
i got a glib error on scrot...so no screenies. 8(
-
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
- Contact:
Re: speckdrum wifi bummer
In Specky, run
and see if you get a ping reaction back. The first pings google's IP address, and the second uses the DNS resolver. If the second fails, you need to enter the DNS servers, like 8.8.8.8 or 8.8.4.4 or 208.67.220.220 to your ceni or Wicd or router.
Remember last time you told me to remove DHCPDISCOVER. I did it, now we have this.
Code: Select all
ping -c 3 8.8.8.8
ping -c 3 google.com
Remember last time you told me to remove DHCPDISCOVER. I did it, now we have this.
..gnutella..
- wuxmedia
- Grasshopper
- Posts: 6454
- Joined: Wed Oct 17, 2012 11:32 am
- Location: Back in Blighty
- Contact:
Re: speckdrum wifi bummer
yay! Bacon is the man!
no DNS!
typed in the chinese lucky number in wicd-client and Robert, is indeed, a close family member. 8)
posting from specky (roaster) right now. 8D
oh, btw i don't remember telling you to remove anything, i wondered what was happening, then i asked how to disable (eth0, iirc ) on my install.
I couldn't, nor wouldn't, begin to presume to tell you how to run this ship.
Not only because you roast these spins real good, but as proved here, I'm waay out of my depth in pretty simple technical issues. 8)
OK this isn't really a bug - more a support question.
thanks for sorting it out.
no DNS!
typed in the chinese lucky number in wicd-client and Robert, is indeed, a close family member. 8)
posting from specky (roaster) right now. 8D
oh, btw i don't remember telling you to remove anything, i wondered what was happening, then i asked how to disable (eth0, iirc ) on my install.
I couldn't, nor wouldn't, begin to presume to tell you how to run this ship.
Not only because you roast these spins real good, but as proved here, I'm waay out of my depth in pretty simple technical issues. 8)
OK this isn't really a bug - more a support question.
thanks for sorting it out.
-
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
- Contact:
Re: speckdrum wifi bummer {Solved}
;-)
In the past releases I had the DNS servers put into a file and they were automatically entered in the network devices, now this time with Wicd the users have to do it themselves. I could add "Enter a DNS server if your router doesn't assign one for you" to the cookbook ("Manage network" section)
In the past releases I had the DNS servers put into a file and they were automatically entered in the network devices, now this time with Wicd the users have to do it themselves. I could add "Enter a DNS server if your router doesn't assign one for you" to the cookbook ("Manage network" section)
..gnutella..
- wuxmedia
- Grasshopper
- Posts: 6454
- Joined: Wed Oct 17, 2012 11:32 am
- Location: Back in Blighty
- Contact:
Re: speckdrum wifi bummer {Solved}
Ok, i understand now, so my router doesn't give out any DNS numbers, rubbish.
I probably 'broke' it.
BBQhelp, good idea, need to help out those lusers 8)
Really, really liking spectrwm and elinks2 with this green screen, ie speckdrum is the spin 8)
talk about lightning quick, massive.
anyway - mark it solved dude. 8)
I probably 'broke' it.
BBQhelp, good idea, need to help out those lusers 8)
Really, really liking spectrwm and elinks2 with this green screen, ie speckdrum is the spin 8)
talk about lightning quick, massive.
anyway - mark it solved dude. 8)
-
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
- Contact:
Re: speckdrum wifi bummer {Solved}
Thank you, glad you like it.
(The green screen is trying to look&feel like the P1 phosphor monitors. The other colour scheme - used for root - is a mock-up of P3 phosphor monochrome, also quite eye-pleasing, but needs heavy configuration in the Xresources file)
(The green screen is trying to look&feel like the P1 phosphor monitors. The other colour scheme - used for root - is a mock-up of P3 phosphor monochrome, also quite eye-pleasing, but needs heavy configuration in the Xresources file)
..gnutella..
Re: speckdrum wifi bummer {Solved}
glad you got it solved wux, and thanks for clearing up your motivations :)
All statements are true in some sense, false in some sense, meaningless in some sense, true and false in some sense, true and meaningless in some sense, false and meaningless in some sense, and true and false and meaningless in some sense.
-
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
- Contact:
Re: speckdrum wifi bummer {Solved}
Try to access your router from a browser (some routers can be accessed by typing 192.168.1.1 into the address bar, others react on 192.168.0.1 or something completely different, refer to your users manual) and override the setting to 'acquire DNS from the ISP' if you are happy with 8.8.8.8 or 208.67.220.220 -- of course this depends on your setup and your router (modem?), so don't take it literally. Being in China I have to override the ISP settings all the time, else I wouldn't even be able to write here ... :/wuxmedia wrote:Ok, i understand now, so my router doesn't give out any DNS numbers, rubbish.
..gnutella..
Re: speckdrum wifi bummer {Solved}
^ tried this with my modem out of curiosity, but i don't have that option, sadly. i suppose it depends on the type of modem, whether it allows you to change stuff like that.
All statements are true in some sense, false in some sense, meaningless in some sense, true and false in some sense, true and meaningless in some sense, false and meaningless in some sense, and true and false and meaningless in some sense.
-
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
- Contact:
Re: speckdrum wifi bummer {Solved}
^ Yes, supposedly routers have that setting when they are separated from a modem. For luck we can override it in Linux using different methods (one is the /etc/resolvconf/* or /etc/resolv.conf file, another is the usage of nm-tool or nm-applet, and of course wicd/ceni/..)
..gnutella..