Forum rules
We don't support installations in VirtualBox, VMWare, qemu or others. We ignore posts about WINE, PlayOnLinux, Steam and Skype. We don't support btrfs, lvm, UEFI, side-by-side installations with GPT or dualboot with anything newer than Windows XP.
Google your problem first. Check the Wiki. Read the existing threads.
It's okay to "hijack" an existing thread, yes! If your problem is not yet covered, open a new thread. To get the quickest possible help, mention the exact release codename in your post (uname -a is a good idea, too). Due to the lack of crystal balls, attach the
output of lspci -nnk if you encounter hardware problems.
-
delphys
- Oyster-Slurper
- Posts: 27
- Joined: Sun Jun 30, 2013 1:49 am
Unread post
by delphys » Sat Aug 03, 2013 4:27 pm
Hello;
Sorry if this was covered else where but ny searches turned uo nothing helpfull .
After installing the Elitist64 this morning & switching the default ,conkyrc witha custom one I am getting following errors:
Any advice appreciated .. Thnx
installed conky:
Code: Select all
rc conky-all 1.9.0-3 amd64 highly configurable system monitor (all features enabled)
ii conky-cli 1.9.0-3 amd64 highly configurable system monitor (basic version)
rc conky-std 1.9.0-2 amd64 highly configurable system monitor (default version)
ii conkyllia 0.1 all Conkyllia - run your conky easily!
Code: Select all
.conkyrc: 1: no such configuration: 'use_xft'
Conky: /home/ishtar/.conkyrc: 2: no such configuration: 'xftfont'
Conky: /home/ishtar/.conkyrc: 3: no such configuration: 'xftalpha'
Conky: /home/ishtar/.conkyrc: 6: no such configuration: 'own_window'
Conky: /home/ishtar/.conkyrc: 7: no such configuration: 'own_window_type'
Conky: /home/ishtar/.conkyrc: 8: no such configuration: 'own_window_transparent'
Conky: /home/ishtar/.conkyrc: 9: no such configuration: 'own_window_hints'
Conky: /home/ishtar/.conkyrc: 10: no such configuration: 'double_buffer'
Conky: /home/ishtar/.conkyrc: 11: no such configuration: 'minimum_size'
Conky: /home/ishtar/.conkyrc: 12: no such configuration: 'maximum_width'
Conky: /home/ishtar/.conkyrc: 13: no such configuration: 'draw_shades'
Conky: /home/ishtar/.conkyrc: 14: no such configuration: 'draw_outline'
Conky: /home/ishtar/.conkyrc: 15: no such configuration: 'draw_borders'
Conky: /home/ishtar/.conkyrc: 16: no such configuration: 'draw_graph_borders'
Conky: /home/ishtar/.conkyrc: 20: no such configuration: 'alignment'
Conky: /home/ishtar/.conkyrc: 21: no such configuration: 'gap_x'
Conky: /home/ishtar/.conkyrc: 22: no such configuration: 'gap_y'
Conky: /home/ishtar/.conkyrc: 27: no such configuration: 'override_utf8_locale'
Conky: use_spacer should have an argument of left, right, or none. 'yes' seems to be some form of 'true', so defaulting to right.
Conky: unknown variable font
Conky: unknown variable font
Conky: unknown variable font
Conky: not implemented obj type 61
Conky: not implemented obj type 61
Conky: not implemented obj type 61
-
pidsley
- Hermit
- Posts: 2539
- Joined: Wed Oct 17, 2012 12:31 pm
Unread post
by pidsley » Sat Aug 03, 2013 7:12 pm
I just installed Elitist64, and I can't reproduce this error with the default conkyrc. Did you install or update anything after you installed? What is this "Conkyllia"? Are you getting those errors when you run conky in a terminal, or when you run Conkyllia?
Please try this simple conkyrc and see if you get the same errors. Please run conky from the command line.
Code: Select all
background yes
out_to_console no
use_xft yes
xftfont terminus:size=8
update_interval 1
total_run_times 0
own_window yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorated,below,sticky
double_buffer yes
#minimum_size 200 200
maximum_width 3500
draw_shades no
draw_graph_borders yes
default_color white
alignment top_middle
temperature_unit fahrenheit
short_units
gap_x 0
gap_y 1
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale yes
TEXT
${time %l:%M %P %A %d %b} | RAM: $memperc% ($mem) | CPU: ${cpu cpu0}% | root: ${fs_used_perc /}% | $sysname $kernel $nodename
-
delphys
- Oyster-Slurper
- Posts: 27
- Joined: Sun Jun 30, 2013 1:49 am
Unread post
by delphys » Sat Aug 03, 2013 7:29 pm
yes .. ran update & got conky with same error
then ran dist-upgrade & the same error again ..
maybe re-install the OS is the solution ..
-
pidsley
- Hermit
- Posts: 2539
- Joined: Wed Oct 17, 2012 12:31 pm
Unread post
by pidsley » Sat Aug 03, 2013 7:51 pm
You can reinstall if you want, but you should not need to. Did you try the simple conkyrc I posted? And you are getting those errors from conky, when you run it like this:
not errors from Conkyllia?
If you do decide to reinstall, try conky without installing anything else immediately after the reinstall.
-
delphys
- Oyster-Slurper
- Posts: 27
- Joined: Sun Jun 30, 2013 1:49 am
Unread post
by delphys » Sat Aug 03, 2013 8:04 pm
when I run conky -c conkyrc-test .. i get the same erros as above
Now I am getting these errors from conkyllia:
Code: Select all
(zenity:1989): Gtk-WARNING **: Theme parsing error: gnome-applications-gray.css:145:20: Not using units is deprecated. Assuming 'px'.
(zenity:1989): Gtk-WARNING **: Theme parsing error: gnome-applications-gray.css:179:22: Not using units is deprecated. Assuming 'px'.
(zenity:1989): Gtk-WARNING **: Style property "border-top-left-radius" is not gettable
(zenity:1989): GLib-GObject-WARNING **: /tmp/buildd/glib2.0-2.36.3/./gobject/gtype.c:4239: type id `0' is invalid
(zenity:1989): GLib-GObject-WARNING **: can't peek value table for type `<invalid>' which is not currently referenced
[1]+ Done /usr/bin/conkyllia
-
pidsley
- Hermit
- Posts: 2539
- Joined: Wed Oct 17, 2012 12:31 pm
Unread post
by pidsley » Sat Aug 03, 2013 8:28 pm
Those are gtk warnings from Conkyllia. I can't help you with those, but they should not make a lot of difference. Did conky work when you first booted your new Elitist install, before you installed Conkyllia? Can you uninstall it?
When you ran conky -c conkyrc-test, did you first copy the simple conkyrc I posted to conkyrc-test?
-
delphys
- Oyster-Slurper
- Posts: 27
- Joined: Sun Jun 30, 2013 1:49 am
Unread post
by delphys » Sat Aug 03, 2013 10:30 pm
Yes the initial conky worked
and yes I re-instated the default conkyrc before I rant the test you suggested ..
I must have borked something along the way ..Think I will re-install ..Thank you for your help..
-
pidsley
- Hermit
- Posts: 2539
- Joined: Wed Oct 17, 2012 12:31 pm
Unread post
by pidsley » Sat Aug 03, 2013 10:41 pm
Save your new conky, and try it before you install Conkyllia.
-
machinebacon
- Baconator
- Posts: 10253
- Joined: Thu Sep 16, 2010 11:03 am
- Location: Pfälzerwald
-
Contact:
Unread post
by machinebacon » Sun Aug 04, 2013 3:03 am
The zenity errors, by the way, can be ignored. It would be a bliss if they'd use yad, instead. Be sure to empty your xsession-error logfile every now and then, it might grow.
..gnutella..