I got only one wireless device, the pci one. I did reboot when switching from network-manager to ceni.
dmesg output (it was very long, so I took only the latest lines. If something you think could be useful is missing please tell me):
Code: Select all
[ 5.217637] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 5.320724] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.321292] Registered led device: b43-phy0::tx
[ 5.321317] Registered led device: b43-phy0::rx
[ 5.321341] Registered led device: b43-phy0::radio
[ 5.321359] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 5.424322] [drm] initialized overlay support
[ 5.485424] Linux media interface: v0.10
[ 5.606474] fbcon: inteldrmfb (fb0) is primary device
[ 5.717605] Linux video capture interface: v2.00
[ 5.720145] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input6
[ 5.745941] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input7
[ 5.783601] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[ 5.784073] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 5.784739] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input8
[ 5.784827] usbcore: registered new interface driver uvcvideo
[ 5.784829] USB Video Class driver (1.1.1)
[ 5.916705] Console: switching to colour frame buffer device 160x50
[ 5.920666] fb0: inteldrmfb frame buffer device
[ 5.920668] drm: registered panic notifier
[ 5.931044] acpi device:2f: registered as cooling_device2
[ 5.931331] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input9
[ 5.931389] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 5.931407] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 5.931440] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.931591] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 5.931629] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.109615] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 6.204054] HDMI status: Codec=1 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 6.316702] cfg80211: World regulatory domain updated:
[ 6.316707] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.316712] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.316716] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.316720] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.316723] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.316727] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.380226] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.380345] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.380440] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.380537] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.465984] Adding 9835516k swap on /dev/sda3. Priority:-1 extents:1 across:9835516k
[ 8.475474] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.813860] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.993565] loop: module loaded
[ 9.084597] i8k: unable to get SMM BIOS version
[ 9.087016] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto ([email protected])
[ 9.680269] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.919072] sky2 0000:09:00.0: eth0: enabling interface
[ 10.919727] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.059317] b43 ssb0:0: firmware: agent loaded b43/ucode15.fw into memory
[ 11.092682] b43 ssb0:0: firmware: agent loaded b43/lp0initvals15.fw into memory
[ 11.101189] b43 ssb0:0: firmware: agent loaded b43/lp0bsinitvals15.fw into memory
[ 11.248117] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 12.354143] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 14.116707] sky2 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 16.924433] b43-phy0 warning: Forced PIO by use_pio module parameter. This should not be needed and will result in lower performance.
[ 16.953847] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.957215] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.285634] lp: driver loaded but no devices found
[ 17.426342] ppdev: user-space parallel port driver
[ 18.720181] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 18.721861] wlan0: authenticated
[ 18.748221] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 18.750558] wlan0: RX AssocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 18.750564] wlan0: associated
[ 18.751740] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 25.934278] fuse init (API version 7.17)
[ 26.747288] wlan0: deauthenticated from 10:0d:7f:3c:32:e9 (Reason: 15)
[ 26.756341] cfg80211: Calling CRDA to update world regulatory domain
[ 26.761828] cfg80211: World regulatory domain updated:
[ 26.761833] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 26.761838] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 26.761842] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 26.761846] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 26.761850] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 26.761853] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.144035] eth0: no IPv6 routers present
[ 28.160594] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 28.162263] wlan0: authenticated
[ 28.162743] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 28.164943] wlan0: RX ReassocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 28.164947] wlan0: associated
[ 29.552011] wlan0: no IPv6 routers present
[ 36.150410] wlan0: deauthenticated from 10:0d:7f:3c:32:e9 (Reason: 15)
[ 36.156297] cfg80211: Calling CRDA to update world regulatory domain
[ 36.161120] cfg80211: World regulatory domain updated:
[ 36.161124] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 36.161127] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 36.161131] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 36.161134] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 36.161137] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 36.161140] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.568724] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 37.570559] wlan0: authenticated
[ 37.571077] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 37.573480] wlan0: RX ReassocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 37.573486] wlan0: associated
[ 45.579672] wlan0: deauthenticated from 10:0d:7f:3c:32:e9 (Reason: 15)
[ 45.588321] cfg80211: Calling CRDA to update world regulatory domain
[ 45.595444] cfg80211: World regulatory domain updated:
[ 45.595450] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 45.595457] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 45.595462] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 45.595468] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 45.595473] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 45.595478] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 46.992591] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 46.994315] wlan0: authenticated
[ 46.995000] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 46.997411] wlan0: RX ReassocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 46.997416] wlan0: associated
[ 52.289864] wlan0: deauthenticating from 10:0d:7f:3c:32:e9 by local choice (reason=3)
[ 52.304404] cfg80211: Calling CRDA to update world regulatory domain
[ 52.327453] cfg80211: World regulatory domain updated:
[ 52.327459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 52.327465] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.327471] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 52.327476] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 52.327481] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.327486] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 93.360226] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 98.860285] b43-phy0 warning: Forced PIO by use_pio module parameter. This should not be needed and will result in lower performance.
[ 98.901696] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 116.380308] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 121.884461] b43-phy0 warning: Forced PIO by use_pio module parameter. This should not be needed and will result in lower performance.
[ 121.917587] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 123.240774] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 123.242437] wlan0: authenticated
[ 123.243881] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 123.246283] wlan0: RX ReassocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 123.246289] wlan0: associated
[ 123.247799] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 124.262318] wlan0: deauthenticating from 10:0d:7f:3c:32:e9 by local choice (reason=3)
[ 124.276456] cfg80211: Calling CRDA to update world regulatory domain
[ 124.287231] cfg80211: World regulatory domain updated:
[ 124.287236] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 124.287242] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 124.287248] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 124.287253] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 124.287258] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 124.287264] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 139.488235] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 144.988452] b43-phy0 warning: Forced PIO by use_pio module parameter. This should not be needed and will result in lower performance.
[ 145.021603] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 146.352869] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 146.356389] wlan0: deauthenticating from 10:0d:7f:3c:32:e9 by local choice (reason=2)
[ 146.364386] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 146.366199] wlan0: authenticated
[ 146.366570] wlan0: failed to insert Dummy STA entry for the AP (error -17)
[ 146.366881] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 146.369413] wlan0: RX AssocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 146.369419] wlan0: associated
[ 146.370982] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 154.372675] wlan0: deauthenticated from 10:0d:7f:3c:32:e9 (Reason: 15)
[ 154.380762] cfg80211: Calling CRDA to update world regulatory domain
[ 154.387530] cfg80211: World regulatory domain updated:
[ 154.387536] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 154.387542] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 154.387547] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 154.387553] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 154.387558] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 154.387563] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 155.784588] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 155.824049] wlan0: deauthenticating from 10:0d:7f:3c:32:e9 by local choice (reason=2)
[ 155.832210] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 155.833835] wlan0: authenticated
[ 155.834345] wlan0: failed to insert Dummy STA entry for the AP (error -17)
[ 155.834666] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 155.836999] wlan0: RX ReassocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 155.837002] wlan0: associated
[ 156.576051] wlan0: no IPv6 routers present
[ 163.835679] wlan0: deauthenticated from 10:0d:7f:3c:32:e9 (Reason: 15)
[ 163.844350] cfg80211: Calling CRDA to update world regulatory domain
[ 163.849394] cfg80211: World regulatory domain updated:
[ 163.849398] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 163.849402] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 163.849405] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 163.849409] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 163.849412] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 163.849415] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 165.252706] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 165.256490] wlan0: deauthenticating from 10:0d:7f:3c:32:e9 by local choice (reason=2)
[ 165.264267] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 165.266028] wlan0: authenticated
[ 165.266409] wlan0: failed to insert Dummy STA entry for the AP (error -17)
[ 165.266719] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 165.269097] wlan0: RX ReassocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 165.269102] wlan0: associated
[ 173.297868] wlan0: deauthenticated from 10:0d:7f:3c:32:e9 (Reason: 15)
[ 173.304777] cfg80211: Calling CRDA to update world regulatory domain
[ 173.311731] cfg80211: World regulatory domain updated:
[ 173.311737] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 173.311743] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 173.311749] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 173.311754] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 173.311759] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 173.311764] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 174.700587] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 174.707914] wlan0: deauthenticating from 10:0d:7f:3c:32:e9 by local choice (reason=2)
[ 174.716287] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 174.717910] wlan0: authenticated
[ 174.718243] wlan0: failed to insert Dummy STA entry for the AP (error -17)
[ 174.718546] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 174.720921] wlan0: RX ReassocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 174.720927] wlan0: associated
[ 182.758939] wlan0: deauthenticated from 10:0d:7f:3c:32:e9 (Reason: 15)
[ 182.768981] cfg80211: Calling CRDA to update world regulatory domain
[ 182.776097] cfg80211: World regulatory domain updated:
[ 182.776103] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 182.776109] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 182.776115] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 182.776120] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 182.776125] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 182.776131] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 184.164815] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 184.176147] wlan0: deauthenticating from 10:0d:7f:3c:32:e9 by local choice (reason=2)
[ 184.184511] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 184.186202] wlan0: authenticated
[ 184.186777] wlan0: failed to insert Dummy STA entry for the AP (error -17)
[ 184.187075] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 184.189411] wlan0: RX ReassocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 184.189417] wlan0: associated
[ 192.189055] wlan0: deauthenticated from 10:0d:7f:3c:32:e9 (Reason: 15)
[ 192.200452] cfg80211: Calling CRDA to update world regulatory domain
[ 192.207696] cfg80211: World regulatory domain updated:
[ 192.207702] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 192.207708] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 192.207714] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 192.207719] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 192.207724] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 192.207730] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 193.596615] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 193.608056] wlan0: deauthenticating from 10:0d:7f:3c:32:e9 by local choice (reason=2)
[ 193.616622] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 193.618245] wlan0: authenticated
[ 193.618575] wlan0: failed to insert Dummy STA entry for the AP (error -17)
[ 193.618847] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 193.621056] wlan0: RX ReassocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 193.621060] wlan0: associated
[ 201.622150] wlan0: deauthenticated from 10:0d:7f:3c:32:e9 (Reason: 15)
[ 201.633046] cfg80211: Calling CRDA to update world regulatory domain
[ 201.639736] cfg80211: World regulatory domain updated:
[ 201.639742] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 201.639748] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 201.639753] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 201.639759] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 201.639764] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 201.639769] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 203.044068] wlan0: deauthenticating from 10:0d:7f:3c:32:e9 by local choice (reason=2)
[ 203.052469] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 203.054251] wlan0: authenticated
[ 203.054624] wlan0: failed to insert Dummy STA entry for the AP (error -17)
[ 203.054934] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 203.057439] wlan0: RX ReassocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 203.057445] wlan0: associated
[ 211.059119] wlan0: deauthenticated from 10:0d:7f:3c:32:e9 (Reason: 15)
[ 211.068979] cfg80211: Calling CRDA to update world regulatory domain
[ 211.076094] cfg80211: World regulatory domain updated:
[ 211.076100] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 211.076106] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 211.076112] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 211.076117] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 211.076122] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 211.076127] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 212.468800] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 212.472321] wlan0: deauthenticating from 10:0d:7f:3c:32:e9 by local choice (reason=2)
[ 212.480462] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 212.482286] wlan0: authenticated
[ 212.482639] wlan0: failed to insert Dummy STA entry for the AP (error -17)
[ 212.482959] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 212.485229] wlan0: RX ReassocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 212.485235] wlan0: associated
[ 220.517329] wlan0: deauthenticated from 10:0d:7f:3c:32:e9 (Reason: 15)
[ 220.528912] cfg80211: Calling CRDA to update world regulatory domain
[ 220.535967] cfg80211: World regulatory domain updated:
[ 220.535973] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 220.535979] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 220.535985] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 220.535990] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 220.535996] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 220.536039] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 221.924834] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 221.940117] wlan0: deauthenticating from 10:0d:7f:3c:32:e9 by local choice (reason=2)
[ 221.952249] wlan0: authenticate with 10:0d:7f:3c:32:e9 (try 1)
[ 221.953884] wlan0: authenticated
[ 221.954689] wlan0: associate with 10:0d:7f:3c:32:e9 (try 1)
[ 221.956205] wlan0: failed to insert Dummy STA entry for the AP (error -17)
[ 221.957152] wlan0: RX ReassocResp from 10:0d:7f:3c:32:e9 (capab=0x411 status=0 aid=1)
[ 221.957158] wlan0: associated
[ 229.962401] wlan0: deauthenticated from 10:0d:7f:3c:32:e9 (Reason: 15)
[ 229.968982] cfg80211: Calling CRDA to update world regulatory domain
[ 229.976072] cfg80211: World regulatory domain updated:
[ 229.976078] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 229.976084] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 229.976090] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 229.976095] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 229.976100] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 229.976105] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)